Spring Replacement
Spring Replacement quick and easy
There exist 2 different spring type that are employed in the operation of overhead doors for garage. They are the extension springs and the torsion springs at the time of Spring Replacement Montebello. Even though the extension spring is much more common than the torsion spring, the torsion spring is believed to be safer than the extension spring and this should be kept in mind during Spring Replacement Montebello. You should have 2 torsion springs, which should be on a shaft, on top of where the garage door opens from. You should be aware that in the event there is an explosion with one of the springs, the 2 springs will have to be replaced. If you don’t do so, you can be sure that the second spring will also explode in no time. You will therefore save yourself money, time and stress if you carry out the replacement of the second one while replacing the first one, even when the second one is yet to literally explode. Extension springs for garage doors also comes in a pair as well, you will however find them beside both garage doors. You need to buy the springs. Find out the exact size of the broken springs. The springs that you buy should be exactly the same size with the broken ones. You cannot replace the spring with bigger or smaller springs. You can get them in hardware shops. You can also download a pdf or check online on how to take the measurements of your garage door. It is good to note that there are two types of basic springs. The torsion springs and the extension springs. The torsion springs are located right above the door while the extension springs are found on either side of the door. |